Hand Tool Headlines

The Woodworking Blogs Aggregator


Be sure to visit the Hand Tool Headlines section - scores of my favorite woodworking blogs in one place.  Also, take note of Norse Woodsmith's latest feature, an Online Store, which contains only products I personally recommend.  It is secure and safe, and is powered by Amazon.


Anne of All Trades

Subscribe to Anne of All Trades feed
Updated: 5 min 53 sec ago

WorkbenchCon, Finishing the #SuperShop and a Visit from the Wood Whisperer

Tue, 02/20/2018 - 4:44pm

After a whirlwind few months, I've got another insanely packed few weeks before Adam and I take a much needed week of vacation at the end of March. This weekend, I'll be at Workbench Conference in Atlanta, GA. If you happen to be in the area, stay tuned on Instagram about the various Maker Meetups and events I'll be attending and please do stop by and say hello. I'm most looking forward to getting some quality time in with my two close friends, April Wilkerson and Ashley Harwood, both incredibly talented female woodworkers who I both look up to and adore. 

Screen Shot 2018-02-20 at 4.32.33 PM.png Screen Shot 2018-02-20 at 4.33.50 PM.png

Other highlights will be meeting other makers I've admired from afar and recharging my batteries and getting inspired to hit the ground running when I get home. Upon my return to Seattle, I'll be getting my new workshop as finished as possible in preparation for the arrival of Marc Spagnuolo, the Wood Whisperer, who will be spending a few days filming me building a writing desk as a purchase-able online class for his online woodworking school, the Wood Whisperer Guild. 

For those local to Seattle, Marc and I will be hosting a Seattle Meetup on March 10, 2018 at 7pm in the Wood Shop at Pratt Fine Arts Center 1902 S Main St Seattle, WA 98072.

Looking towards spring and summer, I am really, really excited to have my new shop operational and can't wait to share the many fun projects I've got up my sleeves in the coming months. Thanks so much for following along!

Oak Writing Desk

Mon, 01/29/2018 - 12:11pm
Screen Shot 2018-01-26 at 3.44.35 PM.png

I'm really excited to be working with Marc Spagnuolo, the Wood Whisperer to create in-depth content for his online woodworking guild. If you've been following me or my blog for a while, you may remember an oak writing desk I built with my good friend Jonathan at Homestead Heritage in Waco, Texas. Since I will be modifying and expanding the original design for the desk over the next couple of months and documenting the process for the Guild, I thought I'd share the original article I wrote about the experience building the chest at Homestead Heritage for F&C magazine. Click here to read the whole article.  


Weekend Workbench

Wed, 01/17/2018 - 6:18pm

Click here to read my article in Furniture and Cabinetmaking Magazine about a weekend workbench featuring my favorite knockdown joint, the Tusk joint. This was one of my favorite builds to date, because it was a project with one of my favorite instructors at Pratt. Steve brings a whole lot of laughter and knowledge into the shop, and I love designing projects and building with him. 

Big announcement!!

Mon, 01/15/2018 - 1:44pm
Oak chest front.JPG

I'm super excited to announce that I've been asked to start contributing to Marc Spagnuolo's Wood Whisperer Guild. The plans for my first guild project are on pre-sale now. This is an expansion of the Oak Writing Desk project I built with Jonathan Schwennessen at Homestead Heritage in Texas for Furniture and Cabinet Making Magazine Issue 248 last year. Click here to view and purchase: https://thewoodwhispererguild.com/product/writing-desk/  Marc will be flying up to the farm to document our first video plan project together, and it promises to be a fantastic time and a wonderful build. I'm really excited to share in an in-depth, detailed, well-documented manner more about the projects I take on. 


Oak Chest back.jpg

Making a Chair from a Tree

Sat, 01/13/2018 - 8:55am

Building a Windsor-style rocking chair with Greg Pennington at Pennington Windsor Chairs was, to date, my favorite woodworking project. It opened up a new, very physical, very engaging side of woodworking I hadn’t before experienced. I loved using a wedge and sledge hammer to split the tree. Not only did it make me feel strong, it also helped me to better understand how wood works and how to get the most strength possible out of a single piece of wood.


Making a chair is, I think for most woodworkers, a major benchmark for progression in their craft. Having seen the Patriot, and being quite comfortable in the realms of square furniture, I really had no intention of ever making a chair. It seemed like it was a whole other skill and toolset than I currently possessed, and I am always wary of casting my net too widely and bringing no genuine knowledge or practiced skill to a craft. As they say, a jack of all trades is a master of none! That is- until I was offered the chance to take a class with some of my dearest friends in the shop of renown chairmaking instructor Greg Pennington.


For me, woodwork has always been motivated far more by relationship than by finished projects. I’ve found the best way to get to know people deeply is by joining them doing something they truly love. My journey as a woodworker started at my grandfather’s workbench. He was a pretty quiet guy most of the time, but he came alive in his woodworking shop. I loved my grandpa, and spending time with him meant spending time pulling and straightening nails, sweeping sweet cedar shavings off his shop floor, or just watching him work. After my grandfather’s passing, when I was twelve my love for woodworking was re-awakened just a six years ago as a way to spend time hanging out at my sister’s house and getting to know my new brother-in-law as he taught me about using handtools to build furniture. Woodworking then became the connection point for another precious older gentleman, 97 years young, who would go on to become an adopted grandpa of sorts  and mentor me further. Then I found the maker community on Instagram, which opened up a whole other world of deep frienships with other folks passionate about making things with their hands. I met leather workers, farmers, musicians and blacksmiths, and my desire to see their eyes light up when talking about something they truly loved led me to start tinkering in those crafts as well.


I mention all this because yes, I built a chair, and yes, sitting and rocking in a chair I quite literally found within a tree stump in just a matter of weeks with a few handtools feels pretty awesome, but far more awesome was spending a week learning from a master. Greg loves what he does, and his eyes sparkle when he talks about every step and technique that bring an heirloom quality chair out of a fallen oak tree. The week I spent in Nashville at Greg’s school was quite literally one of the best weeks of my life. Greg was an incredibly patient and skilled instructor. We worked hard with our hands, we talked about everything under the sun, we drank beer, and we laughed until our ribs were sore. And, at the end of it all, somehow, I’d become a better woodworker with a greater understanding of how wood works, and I got to bring home a chair.


This project involved a lot of firsts for me, first time using a shavehorse for it’s intended purpose, which was especially helpful a few weeks later when it came time to build several for the woodworking school I work at. It was my first time riving wood, and I learned about how to predict and correct for grain runout. I learned how to properly use a spokeshave, how to be braver when roughing out stock because it results in so much LESS work later, how to turn square stock into an octagon and then round, and how to drill compound angles with space lasers. I got way more creative with securing round stock in vises designed to hold square stock, I learned how to make and use wedges effectively, and I confirmed that the sanding and finishing process of a chair is just as miserable and loathsome a task with chairmaking as it is with every other woodworking I’ve done in the past.


One thing I really liked about chairmaking is how many of the tools can be made with some rudimentary knowledge of blacksmithing. So, of course, as is always the case for me, In completing this project, I somehow added about fifteen others to the “someday” list, so look for those in the coming months and weeks.

Check out my new YouTube video on my chairmaking experience by clicking below!

**Photos in this article are by Fell Merwin, and by Melissa Morrison**

How to sharpen a hook knife

Sun, 01/07/2018 - 12:24pm

My video on sharpening curved blades is now live on YouTube! If you've got any questions, comments, or suggestions for other videos let me know in the comments below!

Pre-Orders for 2018 Calendars now open!

Fri, 12/22/2017 - 6:36pm
For Sale preview.jpeg

Pre-Orders for our TWO new 2018 calendars are now open! This year choose from a new Cute Animals and Tools Layout or The Precious Animals of our Farm! $20, free shipping on domestic orders. Find them on the FOR SALE page!

Spoon Carving Part 1 is now live!

Fri, 12/22/2017 - 6:33pm