Hand Tool Headlines

The Woodworking Blogs Aggregator

 

Be sure to visit the Hand Tool Headlines section - scores of my favorite woodworking blogs in one place.  Also, take note of Norse Woodsmith's latest feature, an Online Store, which contains only products I personally recommend.  It is secure and safe, and is powered by Amazon.

Search

The Barn on White Run

Subscribe to The Barn on White Run feed
Where modern craft meets the past.
Updated: 18 min 47 sec ago

Barn Workshop – Knotwork Banding Inlay

Fri, 02/02/2018 - 5:49am

One of my favorite aspects of working on The Roubo Translation Project has been the replication of many of the techniques he described in L’art du Menuisier.  For a long time I thought that intricate banded borders were dauntingly complex and fussy.  Then I did it the way he said and I realized that the artisans of the period had standardized the process so as to make them near idiot-proof.  Voila’, a method I can work with.

The knotwork banding  illustrated in Plate 287 is a perfect case of this.  Using a set of sawing and planing jigs to produce an infinite number of perfectly sized and fitted pieces the design pattern is a piece of cake.  But, as with most things, the set-up is crucial.  And that is what we will be doing in these three days; making the banding, laying out and creating the jig block, and making knotwork corners to your heart’s content.

**************************************************

The complete 2018 Barn workshop schedule:

Historic Finishing  April 26-28, $375

Making A Petite Dovetail Saw June 8-10, $400

Boullework Marquetry  July 13-15, $375

Knotwork Banding Inlay  August 10-12, $375

Build A Classic Workbench  September 3-7, $950

Barn Workshop – Boulle Marquetry

Thu, 02/01/2018 - 5:47am

Since seeing my first piece of antique furniture decorated with tarsia a incastro, or “Boulle work,” I have been captivated by both the art form and the technique.

This ancient method of  using a minuscule blade in a frame saw, usually a jeweler’s saw in our time, for cutting patterns in two or three layers of material comprised of the shell of a sea turtle, a sheet of brass, and sometimes a sheet of pewter, remains captivating to this day.   The result is the same number of completed compositions as the original number of layers in the stack.

Due to the prohibition of trade in turtle shells I invented my own very convincing replacement material I call Tordonshell.

So these three days will comprise of making your own piece of Tordonshell (I will have some pieces made in advance for the workshop) and sawing patterns from packets we will assemble for cutting.

Though we will be cutting them vertically to begin, there is a chevalet in the classroom and anyone who wants to give it  try is welcome to do so.

*********************************************************

The complete 2018 Barn workshop schedule:

Historic Finishing  April 26-28, $375

Making A Petite Dovetail Saw June 8-10, $400

Boullework Marquetry  July 13-15, $375

Knotwork Banding Inlay  August 10-12, $375

Build A Classic Workbench  September 3-7, $950

Desk Prototype – II

Wed, 01/31/2018 - 5:20am

With the legs in-hand it was time to build the writing box that went on top of them.  Again using mostly southern yellow pine from my pile I set to work.  It was straightforward but had to fit the legs precisely.  I dispensed with making the bow-front drawer for the box as it would be predetermined by the box itself.

To get practice for the re-sawing that would come soon in prized vintage mahogany I did that with this tulip poplar stock.

The joinery for the box was mundane but a necessary exercise.

I established the curve of the drawer frame and the top with drawknife and spokeshave.

And put it together.  The writing surface was simply tacked in place with finishing nails as I would need to remove it to check the internals once the real project was underway.  On that version the top would be glued in place with glue blocks.

Up next: joining the legs, box and shelf to finish the prototype.

Barn Workshop – Make A Petite Dovetail Saw

Tue, 01/30/2018 - 6:03am

In recent years my projects and inclinations have guided me towards more diminutive work in thinner stock.  This makes cutting dovetails somewhat of a challenge when using a standard saw, which is often too aggressive and thus harder to control effortlessly.  As a result of that I began exploring the prospect of fabricating my own petite dovetail saw.  I wound up making several with good-to-excellent results.  We will replicate that process and send you home with your own.

If you have a particular piece of wood to use for the handle (tote) feel free to bring it to work with.  Otherwise I will provide all the materials for this workshop.  We’ll aim to fold and finish the back, taper and insert the plate/blade, fit and fashion the handle to your hand, and file the teeth.

The tool list for the workshop is a short one and will be sent to attendees well before the event.

****************************************************

The complete 2018 Barn workshop schedule:

Historic Finishing  April 26-28, $375

Making A Petite Dovetail Saw June 8-10, $400

Boullework Marquetry  July 13-15, $375

Knotwork Banding Inlay  August 10-12, $375

Build A Classic Workbench  September 3-7, $950

The Desk Project – The Prototype

Mon, 01/29/2018 - 4:01pm

It’s been more than four months since I last wrote about my project to interpret an early 19th century writing desk for a client, when I had the opportunity to use period appropriate technology for virtually the entire project.  Previously I had written about deriving the design templates for the project, and this post will finally get down to fashioning wood.

My first problem(?) was that I was a bit hazy on some of the internal construction details of the original.  To resolve that void, or to at least come to a workable conclusion, I needed to build a full scale prototype.  Using some left over 2x SYP from a workbench-building  project I did just that.  I rough cut each leg element with a bandsaw (this was primarily a proportion and joinery exercise) then shaped them just enough to get the gist of the idea.

Then with each individual element fashioned I dove into the joinery for the complete leg assembly, with frequent dry fittings.

Using PVA I glued up each leg.

In the end I had two leg assembles shaped and fashioned, and joined, glued, and assembled.  This was an important moment as I  exerted my full weight on each individual leg to make sure they would hold.

They did.

Barn Workshop – Historic Finishing

Wed, 01/24/2018 - 5:13am

April 26-28 Historic Finishing – My own long-time favorite, we will spend three days reflecting on, and enacting, my “Six Rules For Perfect Finishing” in the historic tradition of spirit and wax coatings.  Each participant may bring a small finishing project with them, but I have found that invitation to have erratic responses so the workshop will focus on creating numerous sample boards to keep in your personal collections.  Tuition $375.

***********************************************

The complete 2018 Barn workshop schedule:

Historic Finishing  April 26-28, $375

Making A Petite Dovetail Saw June 8-10, $400

Boullework Marquetry  July 13-15, $375

Knotwork Banding Inlay  August 10-12, $375

Build A Classic Workbench  September 3-7, $950

 

If any of these interest you, contact me here.

Corpulence 2, Gragg 0

Mon, 01/22/2018 - 4:21pm

One of my long-time interests has been the iconic “Elastic Chair” of Boston chair maker Samuel Gragg, who produced these sinuous featherweight painted chairs for a few short years somewhere in the window of 1805-1815.  Having made a few myself I can see why he switched to technically simpler chairs, but I remain smitten by the form.

At one of the woodworking events in the past I had my Gragg chair there with me on display, and at some point I was absent from its presence and someone sat in the chair who shouldn’t have.  The first hand accounts ex poste indicate that the offender was so corpulent (first hand accounts would suggest said person was well north of four bills) that he could not get out of the chair as his flesh has drooped over the seat rails and filled the void of the arms and even below the arms.  He was wedged in tight as could be.  In the desperate struggle to get out of the chair where he was not supposed to be, the occupant apparently put his forearms on the chair arms with the all the force he could  muster  on the arms of the chair to pry himself out of it.  He was evidently successful in that his bloated dead carcass was not in the chair afterward, but in extricating himself he managed to fracture both arms.  Of the chair.   He fled the scene with nary a word of acknowledgment nor apology.

After contemplating a solution for the time since and seeing a bit of clear sky in my upcoming schedule (and to get warmed up to build two elastic chairs that I’ve been commissioned to make, but more about that later) I have now decided to undertake the repair.  Even though it is something I made myself, thus disposable, I will endeavor to follow the same decision framework I’ve used for for four decades on museum and client artifacts, just to make it interesting.  It will be a great learning experience for me.

Stay tuned.

On Talent and Skill

Sat, 01/20/2018 - 6:12pm

Many people equate “skill” and “talent.”  They are sometimes related, but certainly not the same thing.  It is like the modern conflation of “jealousy,” “covetousness, ” and “envy.”  All are related as manifestations of the same base impulse, but they are not the same (envy being the most pernicious).

But back to “skill” and “talent.”

I possess precious little artistic talent, but have acquired fair-to-middling creative skills.  I remember clearly a session in the studio of one of my art classes in college.  I was succeeding in the class by sheer grit and inordinate time working in the studio; the art didn’t flow out of me simply because the talent was not there.  But I was determined to succeed and spent untold hours at work there.  One day I asked Mrs. Barn to come with me and keep me company as I worked, and as we walked there she picked up a branch of some flowering tree or something.  So while I ground away at my “creating” she whipped out a lovely oil painting of the sprig even though she never trained as an artist.  But she has sublime artistic talents while I am saddled with a noteworthy lack of them.

I’m not sure if curiosity is a talent, but I do have a fair bit of that.  Perhaps my greatest creative gift was that I was an indifferent student in school prior to my third stint in college, when I worked and learned with a vengeance.  But middle school and high school?  Nah, I did not pay enough attention to enable them to beat the curiosity out of me and I was able to retain my native impulse to color outside the lines.

Talent is, I believe, a portion of that inventory of nascent gifts imparted at our conception as unique creatures, whereas skills are the abilities honed through repetitive exercises.  That said, the vocabulary of skills we possess allows us to expand our creative and productive capacity to a nearly limitless vista, and to hone those natural talents.

As a craftsman and teacher that is where I try to invest my resources.

I am at a point in my life where my writing is an output that has value in the marketplace, all the more surprising to me in that I went to gubmint schools at a time when the rigors of language arts were, shall we say, not emphasized.  Now I practice writing on a near-daily basis to sharpen my skills of wordsmithing.  This occurs on this blog as often as I can even though many acquaintances urge me to de-emphasize my writing here in exchange for “more followers” via other vehicles that do not require anything more than a few pictures and words on a smart phone.  I have resisted this for several reasons, not the least of which is I do not have a smart phone and have little interest in getting one given that I live in a place with almost no cell service.  Second, if my goal is to increase my ability in crafting words, I’d better spend some time crafting words rather than avoiding it.  An analogy would be encouraging someone to refine their joinery skills at the workbench by giving them a screw gun.

Instead, for the time being I prefer to write short articles for this blog a few times a week as a means of not only connecting with those who read it but also accomplishing the not-so-unintended-consequence of  improving my own writing skill set.  I know I will never become as facile as Chris Schwarz given both his natural talents and honed skills that enable him to have a daily output capacity of probably four thousand words.  I hope for a tenth of than, and dream of a quarter, a pace I actually maintained while writing the 40,000 word first draft manuscript of Virtuoso in six weeks.

For the past few years I have endeavored to write something every day.  A blog essay, even if only a short one, or at last a portion of one (some blogs take a few sessions of verbal noodling).  Or another portion of my ongoing book manuscript, at present The Period Finisher’s Manual (I am targeting the end of the year for its completion).  Some mystery/thriller fiction, currently about a derelict antiques restorer out in the mountains and how he eventually saves the world.  Blowing off steam by recording pithy observations about the state of the world around me.

It is all enjoyable and ruthlessly demanding, but it is how I am building my muscles in formulating and organizing ideas and putting them into words.

Simply put, the regimen makes me more skilled at writing.

The same is true with my physical craft.  As a furniture maker I will not and probably cannot become Jean-Henri Riesener, John Goddard, Alvar Aalto, or James Krenov.  I am unlikely to ever become a truly skilled engraver, or metalsmith, or machinist, or chemical engineer.  But I can become better than I am.

And so can you.

While I cannot endow you with creative genius, I can encourage and direct you in the genesis and more full formation of skills through practice and exercise.  This has become cemented as the goal for my time in The Barn on White Run; that I explore and create, and share those adventures with you that you might be more encouraged to do the same.

In the coming weeks and months I hope this will become manifest on this blog with my mercurial musings about craft and life on the homestead being augmented with more postings about the processes of  doing and not just my noumena.  One iteration of this starting next will be a series of bench exercises I presented at last year’s  banquet address for the Colonial Williamsburg Working Wood in the 18th Century shindig.

Another will be the multi-part walk-through of interpreting an early 19th century writing desk, of which I have already written a couple of blogs in the past.

And making instructional videos for distribution with a talented young local film maker.

And making and modifying tools.

And Gragg chairs.

And workbenches.

And, and, and…

All in pursuit of skills, in service to my “talent.”

Barn Tuneup – Front Door

Thu, 01/18/2018 - 4:07pm

As the depths of winter set in out here in the mountains I decided to do something about the problem of early fading light, especially in the great room of the barn’s main floor.  On a typical January day I lose direct sunlight by about 3:30, and the darkness creeps in from that point on.

I decided that a big hurdle to solving the problem lay in the fact that the two oversized doors to the barn were visually solid, and that a solution might be to pierce them with large panes of glass.  Fortunately I happened to have just one such piece of glass leftover from the original construction a decade ago.  It is a piece of salvaged thermal glass  from an unremembered source but it was sized as though it was made for the task being contemplated and it seemed as though the project would be easy to undertake and complete.

So I did.

Since I was using the panel of glass essentially as a piece of sheathing the “framing” of the new window was a simple batten screwed to the door so that the panel would have  someplace to seat.  After the batten frame was in place I sawed out the opening for the window, lifted the new pane into its seat, and added some more temporary battens to the rear side to hold it in place until spring time when the warmer weather will allow me to caulk it in place permanently.

Until then I am enjoying both the doubling of the external light present in that work space, and celebrating the fact that this was one project that turned out to be as simple and quick as I had first imagined.  I would like to find another panel the exact same size for the other door, and will keep scouring the salvage yards until I do.

For now, I simply enjoy being able to work in the great room until almost five o’clock.

Talking Studley in Fredericksburg VA

Wed, 01/17/2018 - 6:10am

Recently I was invited to speak about the HO Studley project to the Frederickburg (VA) Woodworker’s Guild.  My friend SteveD was my host and a grand time ensued.

While at Steve’s I got to see a bed frame he had been working on in recent weeks, and about which we had corresponded regarding the finish being used.  This bed was commissioned by the organization that is recreating George Washington’s childhood home near Fredericksburg.  Much of the recreation is based on rigorous and ongoing archaeology.  The Washington family domicile being readied for the public is all new construction, but there is solid evidence that it is a very faithful interpretation of the original.

Steve has been commissioned to create a number of beds (and perhaps other pieces?) for the site, and this bed is a stunning one.

The audience at the Guild meeting was large and enthusiastic, Steve said it was about twice normal.  And you gotta admit, the tale of Henry O. Studlew is a compelling one.  The group meets in a semi-industrial space which suited me just fine.

The audience was very attentive and engaged, asking excellent questions throughout the presentation and staying after to discuss all manner of Studley and Roubo topics.  They promised to invite me back, and I look forward to that event.

Of Barn Doors and Stump Sitting

Tue, 01/16/2018 - 3:20pm

En route back to Shangri-La following our excursion into deepest Flyover Country we stopped to see the progress of things at Lost Art Press.   Mrs. Barn had never seen the new World Headquarters and since they were within a mile of our route, I checked to make sure we could stop.

As usual Chris was hard at work in the shop and on the shop, but he took a few minutes to visit and relax.

During that brief visit I sat in the Mother of All Stump Chairs that Chris has been chronicling.  I cannot say I could sit there for an entire evening but it was more comfortable than I expected and looked pretty cool too.  All I needed was a bearskin vest and a grog of mead and I would have looked right at home.

We also toured the new machine room emerging from the renovation of the carriage house out back, and Chris had just hung and caulked his hand-made doors before we arrived.  I definitely approve.

I join Chris in celebrating the establishment of the new headquarters, and even his dream of living in this vintage high density neighborhood.  He likes having neighbors nearby, I like having neighbors on the other side of the mountain.

Bowsaws, The Next Frontier

Mon, 01/15/2018 - 6:00am

While visiting Mark Harrell recently our conversation returned to a topic we had engaged in previously, namely that of the repertoire of saws in an 18th century Parisian workshop.  Whatever they had, Mark wants to try to make it.

The literary evidence is pretty clear that the workhorse saws in these shops were frame saws for much of the heavy dimensioning (ripping) work and bow saws for the rest, including joinery.  (Roubo makes no references to back saws)  We might tend to see bow saws as a northern implement, coming from Scandinavian and Germanic traditions, but Roubo places inordinate emphasis on their use and utility in the Paris of his time.

The variations within this theme are many, but at present I am trying to brainstorm about adapting Roubo’s images and descriptions to the tasks of a workshop in 2018.  I am starting from the premise that the saw plate Mark developed for the frame saw should serve equally well in a bow saw with the plate fixed parallel to the plane of the frame.  With that in mind I have been noodling the designs and begun replicating at least one of a pair of Roubo bowsaws (the other being a compass or “turning” saw, so noted as having a shallow blade that can both follow a curved cut and be rotated in the bow handle for greater facility) in time for demonstrating at CW next week.

Hoping for success.  Wish me luck.

LOL

Sun, 01/14/2018 - 7:01am

This giant banner at Bad Axe Toolworks made me laugh out loud.  You know Roubo is catching on when the yardstick for a tool is its ability to cut the dovetailed leg tenons for a Plate 11 workbench.

I Came. I Sawed. I Collaborated.

Sat, 01/13/2018 - 6:07am

My recent trek around Flyover Country included an intersection between my path to my home town in southern Minnesota (the tropical part) and LaCrosse, Wisconsin, home to Mark Harrell and his ambitious enterprise Bad Axe Tool Works.  I’ve been collaborating with Mark for some time on the development of a frame saw/sash saw  with the promise that he would put one in my hands.

As the owner of two c. 1800 four-foot frame saws I was delighted to share the particulars about them with anyone who wanted to know.  Their details are spectacular, from the hand forged hardware to the forged plates in near-perfect condition.  (by that I mean there are no kinks or missing teeth, there was plenty of surface rust and the teeth needed touching up)

Like other saw makers, Mark contacted me some time ago and I took the time to talk with him at length about the vintage saws I have, in addition to the diminutive version I made for myself.  Mark was particularly interested in a model halfway between my vintage big ones and my new smaller one, and we worked out the details over many emails and phone calls, an interchange I welcome from any tool maker who wants my two cents worth.  To this point my only fee is that I get one of the tools in question if they ever go into production.  I think Bad Axe might have had this model at Handworks 2017, but I was so busy I could never get to their station once they got set up, so this was my chance.

Accompanied by The Oldwolf, Derek Olsen, we arrived late-morning.  And the saw geek-dom commenced.  Behind this modest door and awning is a buzzing hive of saw making.

Mrs. Barn and I got a quick tour of the facility, getting the opportunity to meet and greet each of the the sawmaking elves there.

I was especially impressed with the classroom they have set up there for saw making and sharpening workshops.  Mark definitely has the leads for mondo saw sharpening vises and setters.

Then we got down to the real fun as Mark brought out several models of saws for me to play with.  I already own two Bad Axe saws, including a custom made dovetail saw I commissioned and that has now become ensconced in their product line.  Under Mark’s watchful eye the playing commenced, and it was glorious!

Our exploration of the topic continued almost non-stop and we were torn between talking about saws, and sawing.

Then came the “official” purpose of the visit,  taking delivery of my own Bad Axe frame saw based on Roubo, my old saws, and my new one, with a bit of Bad Axe special sauce tossed in for good measure.

It performed perfectly right out of the box and will be integrated into my shop work as soon as it gets home.

More about the visit in the next post.

Dropping In On Oldwolf

Fri, 01/12/2018 - 2:42pm

A recent trip to the Midwest for a variety of family gatherings provided a chance to drop in on Derek Olsen of Oldwolf Workshop fame.  Derek’s is a fairly recent entrance into my orbit, but our friendship is fast and strong.   He was first among the multitude of friends who volunteered to help with the 2015 HO Studley exhibit, and his account in The Bank of Don is brimming.

The stop for fellowship was a delightful one as you might expect.

Derek proudly showed his impressive library of furniture history books, his shrine to Studley, and his still-in-development shop in the garage next to where he and Mrs. Oldwolf moved in recent years.

After our time there, we headed down the road (actually only a few blocks) to some time of saw geek-dom at Bad Axe.

But that’s for the next post.

Studley Tool Cabinet Molding Profile

Wed, 01/10/2018 - 6:57am

I blogged recently about visiting my friend, Mister Stewart, and his ensemble of the Henry Studley tool cabinet and workbench.  One of the purposes of the visit was to get a better picture of the molding profile on the cabinet, but Mister Stewart did one better than that.  During his fabrication of the new workbench base he replicate exactly the moldings from the tool cabinet and gave me one of the scraps from that enterprise.  I finally got a chance to take a picture, and here it is.

If you would like a better resolution picture of the cross-section, drop me a line here.

2018 Barn Workshops

Tue, 01/09/2018 - 5:23am

Here’s a list of the Barn workshops I’ve pencilled in for this year.  I will blog in greater detail shortly.

Historic Finishing  April 26-28, $375

Making A Petite Dovetail Saw June 8-10, $400

Boullework Marquetry  July 13-15, $375

Knotwork Banding Inlay  August 10-12, $375

Build A Classic Workbench  September 3-7, $950

They Just Don’t Make (fill in the blank) Like They Used To

Mon, 01/08/2018 - 5:28am

Notwithstanding the fact that I believe we are living in The Golden Age Of Woodworking Tools, the precipitous decline and apparent imminent demise of Sears/Craftsman is a cautionary tale, although I remain uncertain of its ultimate meaning.  As a devotee of Joseph Schumpeter’s “creative destruction” premise, I do not mourn Sears/Craftsman’s passing as much as I celebrate the role going to the Sears tool department played in my early life.  The tool department was large, the shelves fully stocked with high quality products, and the sales folks knew what they had and how to use it.  Really.  That is probably incomprehensible to anyone going to Sears now, but it was true in 1970.

The trips there with my Dad were too numerous to recall, and were equal parts utilitarian errands and incalculable treasure hunts.  Our bond of toolism and tinkering was foundational, continuing until the day he took his final breath and we parted with no unfinished business.  In fact that bond remains as after his funeral my brothers and I divvied up his tools, some of which get used in my shop now.

The first tool I ever bought with my own lawn-mowing money was this pocket knife, still in use 49 years after its purchase.  (full disclosure — I could not lay my hands on mine at the moment, it is probably in a pair of pants or overalls that I have hanging on some hook in some closet.  This is an identical one I saw on ebay.)

My first power tool was this 3/8″ Craftsman drill, still going strong after 47 years.  It’s a low-speed, high torque unit that can just as easily spin you around if used carelessly.  The only changes from the day I bought it are a new power cord and Jorgensen chuck.

I still have many other wrenches, sockets, and screwdrivers from the same store bought around the same time.  None has ever given me a lick of trouble.

But recently my mondo Craftsman Shop Vac gave up the ghost, after only 44 years of faithful service.  Or at least I inferred that it was dead based on the acrid smoke shooting out of the motor casing moments after it ceased operating with a snap, crackle, and pop.  I did not even bother with an autopsy, merely cutting off the power cord and taking the canister lid to the dump (I never throw away a good power cord).  I saved the rolling base, it still serves as a receptacle for scraps.

On the way home from the dump I stopped at our local farm coop and hardware store and bought a successor model.  Given the current state of Craftsman products, I guess I will only get 30 years or so from it.  I can only imagine how cranky I will be shopping for a new one at 92.

Teaching Historic Finishing At MASW

Fri, 01/05/2018 - 4:42pm

Right after the conclusion of the Parquetry workshop at the Marc Adams School of Woodworking I dove in again with three days of Historic Finishing (reminder to self — DO NOT do this again.  The logistics of changing horses mid-week is a headache you can do without).  This class had more than a dozen students, and the enthusiastic feedback had led Marc to ask me to develop an expanded  week-long workshop on the same topic, which we will do in 2019.

I’ve pretty much got this workshop dialed in, as I do with Parquetry, so there is a fairly fixed syllabus here.  The emphasis is on processes and work habits rather than having a “completed” project at the end, concentrating on shellac spirit varnishes and beeswax applications.

The starting point is this 24×48 panel building up multiple brushed applications of 1-1/2 pound cut shellac to about 18 layers over the first day and a half.  Getting this to “done” allows us to explore the detailing and polishing of the surface.

We used polissoirs for preparing surfaces and applying wax, and filled the grain with molten beeswax.  Then we made and used polishing pads for applying spirit varnish.

Each student got to address the problems of finishing undulating surfaces,

applying pigmented wax grain filler,

and even making historic sandpaper.

The giant panels were polished out with a variety of period-appropriate abrasives,

and one quadrant was glazed with asphaltum.

All in all, it was a great time of fellowship and learning.  How could it not be, we were finishing!

 

Teaching Parquetry at MASW

Tue, 01/02/2018 - 6:26am

I recently spent a week at the Marc Adams School of Woodworking, teaching two three-day courses.  I believe this was an experiment on Marc’s part, road testing some new scheduling concepts such as a three-day workshop during the week as opposed to only on weekends.

The Parquetry workshop had three enthusiastic attendees (plus a most excellent teaching assistant), a number the Marc told me precludes any repetition of the topic.  This is an entirely fair conclusion on his part as he has a huge footprint to support.  With several classrooms in simultaneous use I’m guessing he needs somewhere between 35-50 attendees every day for six months to make it work.

In fact our merry little band was in a huge, well equipped classroom with twenty (?) workbenches.  The spaciousness was both unnerving and delightful as the students could spread their projects as widely as they wanted.

This workshop is somewhat unusual for me in that there was a finished project at the end, while I tend to prefer teaching a skill-set rather than a project.

But skills and processes were taught and practiced, including the making of sawing and planing jigs,

sawing veneer stock for making the patterns,

the assembly of the patterns,

fabricating and integrating simple bandings,

and gluing them down to a substrate.

In the end they were cleaned up with toothing planes, files, and scrapers making them ready for the finishing process.

Though I will not be teaching this workshop again at MASW, I will not completely set the general topic aside.  I am hoping to have a workshop on knot-work banding perimeters there in 2019.

Pages